How to Configure/Order Complete the next 3 steps to configure your screw jack. Select additional options as required to customise. View PDF drawing and download 3D CAD models.
Select lifting screw option: Both rotating and translating screw jacks can be mounted on either top or bottom face Mounting The structure on which the jacks are to be mounted should have ample strength to carry the maximum load and should be rigid enough to prevent deflection or distortion of the jack support members. Safety distances between moving and stationary components must be established otherwise there is the risk of the system blocking and causing damage to the screw jacks and system components. Guiding Guide systems must be employed to limit the effects of expansion, contraction and deflection. Moving parts should be guided parallel to the jack lifting screws. Maintenance and lubrication The design must allow adequate access to inspect and carry out routine maintenance including onsite re-lubrication. Rotating Screw Translating Screw Translating Screw – Keyed
Select travel rate: The nominal travel is determined by the application Travel speed is a function of the incremental distance travelled by one rotation of the input worm shaft and speed of rotation. Having selected a travel speed be aware of the screw jack power rating, check PDF Datasheet for details, after completing step 4. The increments determine the distance travelled by 1 rotation of the input wormshaft. 0.25mm/rev0.5mm/rev1mm/rev2mm/rev
Select the length of travel: When the jack is installed according to the standard dimensions shown in the PDF datasheet, the safe travel is the distance that the load moves. When the jack is installed with a non-standard closed height/and or bellows, the safe working travel should include an allowance for these features. The PDF datasheet gives details of these dimensions. Drag the slider to choose a predetermined length of safe travel. For fine adjustment on rotating screw options, see bearing plates in Accessories. The selected length is: 0mm 0mm 25mm 50mm 75mm 100mm 125mm 150mm 175mm 200mm 225mm 250mm 275mm 300mm 325mm 350mm 375mm 400mm 425mm 450mm 475mm 500mm 525mm 550mm 575mm 600mm 625mm 650mm 675mm 700mm 725mm 750mm 775mm 800mm 825mm 850mm 875mm 900mm 925mm 950mm 975mm 1000mm 0 1000 Trapazoidal material Steel (080M40)Stainless steel (316)